Parametric Investigation on the Use of Lateral and Longitudinal Rotor Trim Flapping for Tiltrotor Noise Reduction
Carlos Malpica, NASA
May 8, 2017

Parametric Investigation on the Use of Lateral and Longitudinal Rotor Trim Flapping for Tiltrotor Noise Reduction
- Presented at Forum 73
- 15 pages
- SKU # : 73-2017-0318
- Your Price : $30.00
Join or log in to receive the member price of $15.00!
Parametric Investigation on the Use of Lateral and Longitudinal Rotor Trim Flapping for Tiltrotor Noise Reduction
Authors / Details: Carlos Malpica, NASAAbstract
This paper presents an acoustics parametric study of the effect of varying lateral and longitudinal rotor trim flapping angles (tip-path-plane tilt) on noise radiated by an isolated 26-ft diameter proprotor, similar to that of the AW609 tiltrotor, in edgewise flight. Three tip-path-plane angle of attack operating conditions of -9, 0 and 6 deg, at 80 knots, were investigated. Results showed that: 1) minimum noise was attained for the tip-path-plane angle of attack value of -9 deg, and 2) changing the cyclic trim state (i.e., controls) altered the airloads and produced noticeable changes to the low-frequency (LF) and blade-vortex interaction (BVI) radiated-noise magnitude and directionality. In particular, by trimming the rotor to a positive (inboard) lateral flapping angle of 4 deg, further reductions up to 3 dB in the low-frequency noise sound pressure level were attained without significantly impacting the BVI noise for longitudinal tip-path-plane angles of -9 and 6 deg.